INDICATIONS AND CHARACTERISTICS
- Concentrated acrylic fixing.
- Very good fixation.
- Very good penetration.
- Highly resistant to alkalies.
- It is easy to apply.
- It is indicated to fix and harden the interior walls and ceilings, for old distemper paints before painting with plastic paints, and all type of porous or dusty materials.

PREPARATION AND APPLICATION
Apply on a dry and clean surfaces.
Dilute one part of ACRIFIX with six parts of water, apply with a brush or roller one abundant coat of the obtained mixing until the support has a suitable fixation. After 5-6 hours the surface can be painted with plastic paint.
Is very important to carry out the indicated dilution before applying the product. If it is not diluted the paint will be concentrated on the surface.
Do not use by temperatures below 5ºC and the relative humidity is 85%. 
To apply with a roller or brush.

SPREADING RATE
Approximately 25-30 mt2/l, adequately diluted and it depends on the absorption of the surface.

COLOURS
Transparent, when it is dry. 

POT LIFE
36 months since production, in original tin, do not open, store in a dry place with temperatures between 5°C and 35ºC.

TECHNICAL CHARACTERISTICS 
Density : 1,020 Kg/lt. approximately.
Thinner : Water.
Solids volume rate : 45%.
Drying time (in normal conditions) 
- to touch : 1 hour.
- recoating interval : 5-6 hours.
Clean tools : Water. 
Solvent : Water. 

NOTE: The data reflected here is informative and agree with the rehearsals carried out in our Laboratories under good conditions of application. If these suffer a change they would be carried out a previous rehearsal again.