ANTIGOTERAS FRAYCAR
 
INDICATIONS AND CHARACTERISTICS
- To make waterproof terraces, roofs, gutters and side walls.
- To apply on cement, plaster, brickwork, stone, wood, steel, asphalt, etc.
- Its elasticity following the dilatation and contraction movements without getting broken.
- It is possible to paint asphaltic surfaces.
- To be exempt of tars, asphalts and polishs.
- It is not indicated for trafficked areas.

PREPARATION
It is recommended two coats dilute 15% to 20%  into water for the first coat of painting (1 litre of water per  5 Kgs. of paint) and until 5% in the second one (a glass of water per 5 Kgs. of paint).

APPLICATION
With a brush,a wool roller or a spray-gun.
It is necessary two coats.
On clean and dry surfaces.
It is recommended not to tread on painted surface until after a week of their painting.
ANTIGOTERAS FRAYCAR do not use either with high temperatures or rain.

SPREADING RATE
Between 1,5- 2 Kgs./m for 1 mm. of surface.

COLOURS
Three shades: White, Grey and Red.

FINISHES
To obtain smooth finishes.

TECHNICAL CHARACTERISTICS
Nature : Elastic copolymer resins. 
Density : 1,30 gr./cm3.
Thinner : Water.
Drying time (in normal conditions) 
- to touch : 3 hours.
- recoating interval : 12 hours.
- fully dry : 28 days.
Break lengthening : 325 % (aprox.).
Toxicity : It does not contain arsenics, mercury, silver or plumb.
Do not use by temperatures below  5º C.
NOTE: This product has passed the resistance test and it is in accordance with regulation  U.N.E. 53/358-84.It possesses the Certificate of Quality and Behaviour issued by GEOCISA, report Nº 21.002-96-190.

NOTE: The data reflected here is informative and  agree with the rehearsals carried out in our Laboratories under good conditions of application. If these suffer a change they would be carried out a previous rehearsal again.

 Previous Page
Next Page
Waterproofs-Leakproofs