USES AND CHARACTERISTICS
- Moistureproof revetment for facades.
- For interior and exterior decoration (facades, wells, buildings, etc).
- Easy application.
- A good coverage and whiteness.
- High hardness and resistance.

PREPARATION
Apply over clean. When the surface has slaked lime, dust, mildew, etc. FIXAMUR should be applied on interior and exterior walls.
For best result is recommended two coats, dilute 15% to 20% into water for the first coat of painting (1 litre of water per 5 Kgs. of paint) and between 5%-10% in the second one ( a glass of water per 5 Kgs. of paint).

APPLICATION
With a wool roller, a brush or pressure equipment. It is recommended two coats for getting a good finish. Apply one coat of FIXAMUR on dusty and porous surfaces.
On mildew surfaces is recommended an acid washed and a water washed.

SPREADING RATE
Approximately 2,5-4,5 m2/Kg.applying with a wool roller.

COLOURS
Only white.

FINISHES
To obtain smooth finishes.

TECHNICAL CHARACTERISTICS
Nature : Acrylic copolymer resins.
Pigment : Titanium dioxide.
Density :1,50 gr./cm3
Thinner : Water.
Drying time (in normal conditions)
- to touch : 2 hours.
- recoating interval : 2-4 hours.
- fully dry : 28 days.
Pot life
- 7 days at 50º C.: All right.
- If the tin is not opened : One year.
Toxicity : it does not contain arsenics, mercury, silver or plumb.
Do not use by temperatures below 5º C.

NOTE: The data reflected here is informative and agree with the rehearsals carried out in our Laboratories under good conditions of application. If these suffer a change they would be carried out a previous rehearsal again.