INDICATIONS AND CHARACTERISTICS
Transparent varnish the synthetic resin based of a soft amber colour.
It has an excellent resistance to weather. This product is designed for protection of wood, specially for boats because it is resistant to water. It is also used on doors, windows, tables, chairs, etc. 
High gloss and colour retention.
Resistance to fresh and salt water.
It has a high hardness.
Very washable.

TECHNICAL CHARACTERISTICS
Glossy.
Colour : Colourless.
Solids volume rate: 69%.
Viscosity : 85-95 U.K.
Density : 0,9Kg/lt.
Drying time at 20º C and 65% R.H. : 6 - 8 hours. Recoating interval: 24 hours.
Resistance continuous temperature : 90º C (dry heat).
Spreading rate : between 12- 16 m2/l brush application.

CONDITIONS OF APPLICATION
Conditions of application : Temperature between 5 and 40º C.
Relative humidity : 85%
It is recommendable a good stirring of the product before use.
Easy to apply with paint roller, brush, spray-gun, airless-gun.
Clean tools with synthetic and oil thinner.

METHOD OF APPLICATION
Apply only on a dry and clean surface.
New wood : Only the first coat must be diluted 15-20%. After 24 hours, sand-papering and application next  coats diluted 5%.
Previously varnished wood : Check the compatibility with the existing varnish sand-papering and application a synthetic varnish.
Stability : 48 months since its production, in original tin, do not open, store in a dry place with temperatures between 5 and 35º C.

NOTE: The data reflected here is informative and agree with the rehearsals carried out in our Laboratories under good conditions of application. If these suffer a change they would be carried out a previous rehearsal again.