INDICATIONS AND CHARACTERISTICS
Glossy varnish, based of resins.
This product is designed for restoration of wood and furnitures, for interior and exterior surfaces, it can be applied on doors, windows, mouldings, etc.
Ennoble the natural white wood. 
Excellent gloss and colour retention.
Very transparent.
Easy application.
Excellent resistance.
Very good resistance to exterior conditions.
Washable.

TECHNICAL CHARACTERISTICS
Gloss : Very glossy.
Colour : Colourless.
Solids Volume Rate : 61% average.
Viscosity : 85-95 U.K.
Density : 0,9Kg/lt.
Drying time at 20º C and 65% H.R.: Without stickiness : 4 - 5 hours. Recoating interval : 16 – 24 hours
Resistance continuous temperature : 90º C (dry heat)
Spreading rate : Between 12 and 16 m2/l, approximately applying with a brush.

APPLICATION
Conditions of application : Temperature between 5 and 40º C.
Relative humidity : 85%
It is recommendable a good stirring of the product before use.
Easy to apply with brush, roller, spray-gun, airless-gun.
Clean  tools with synthetic and oil thinner.

METHOD OF APPLICATION
Apply only on a dry and clean surface.
New wood : Only the first coat must be diluted 15-20%. After 24 hours, sand-papering and application   next coats diluted 5%.
Previously varnished wood : Check the compatibility with the existing varnish, and if it is in good condition, clean the surface, sand-paper and apply a synthetic varnish.
If the varnish is in bad condition, cracked, whitish, bad adherent, it must be removed with sand-paper and then follow the same procedure as new surfaces.
Pot life : 48 months, since its production, in original tin, do not open, store in a dry place with temperature between 5 and 35º C.

NOTE: The data reflected here is informative and agree with the rehearsals carried out our Laboratories under good conditions of application. If these suffer a change they would be carried out a previous rehearsal again.