INDICATIONS AND CHARACTERISTICS
- High quality. For exterior decoration : wells, front of buildings, factory premises, etc.
- It is moistureproof and it allows to waterproof.
- High hardness and resistance.
- A good coverage and whiteness.
- Easy application.
- To apply on cement, plaster, white plaster, etc.
- Soft touch, without dolomites.

PREPARATION
Apply over clean. When the surface has slaked lime, dust, mildew, etc.
FIXAMUR should be applied on the walls.
For best result is recommended two coats, dilute 15% to 20% into water for the first coat of painting (1 litre of water per 5 Kgs. of paint) and between 5%-10% in the second one (a glass of water per 5 Kgs. of paint).

APPLICATION
With a wool roller, brush or pressure equipment.

SPREADING RATE
Approximately 4-6 m2/Kg. applying with a wool roller.

COLOURS
Only white.

TECHNICAL CHARACTERISTICS 
Nature : Copolymer resins. 
Pigment : Titanium dioxide.
Density : 1,50 gr./cm3.
Thinner : Water.
Drying time (in normal conditions) 
- to touch : 2 hours.
- recoating interval : 2-4 hours.
- fully dry : 28 days.
Pot life 
- 7 days at 50º C : All right.
- if the tin is not opened : One year.
Toxicity : It does not contain arsenics, mercury, silver or plumb.
Do not use by temperature below 5º C.

NOTE: The data reflected here is informative and  agree with the rehearsals carried out in our Laboratories under good conditions of application. If these suffer a change they would be carried out a previous rehearsal again.