INDICATIONS AND CHARACTERISTICS
- For exterior and interior surfaces.
- Semi-washable paint.
- It can be applied on cement, plaster, etc.
- Easy application.
- A good covered and whiteness.
- A good efficiency.

PREPARATION
Apply over clean. 
When the surface has slaked lime, dust, mildew, etc. Acrylic Fixing ACRIFIX should be applied on interior walls and FIXAMUR with solvent on exterior walls.
It is recommended two coats dilute 15% to 20% into water for the first coat of painting (1 litre of water per 5 Kgs. of paint) in the second one (a glass of water per 5 Kgs. of paint).

APPLICATION
With a brush, a wool roller or a spray-gun.

SPREADING RATE
Approximately 3,5- 5,0 m²/Kg. applying two coats with a wool roller.

COLOURS
Only white.

FINISHES
To obtain smooth finish (with a wool roller or brush).

TECHNICAL CHARACTERISTICS
Nature : Copolymer resins. 
Pigment : Titanium dioxide.
Density : 1,65 gr./cm³.
Thinner : Water.
Drying time (in normal conditions) 
-  to touch : 1 hour and 30 minutes.
-  Recoating interval : 2- 4 hours.
-  fully dry : 28 days.
Pot life 
-  7 días at 50º C : All right.
-  If the tin is not opened : One year.
Toxicity : It does not contain arsenics, mercury, silver or plumb.
Do not use by temperatures below  5º C.
Whiteness (interval 0..100) : 94.
Coverage (interval 0..100) : 91.
Washable Gardner (interval 0..5.000 Psd.) : 1.500 double coats (28 days)

NOTE: The data reflected here is informative and agree with the rehearsals carried out in our Laboratories under good conditions of application. If these suffer a change they would be carried out a previous rehearsal again.