INDUSTRIAL SATINADO
 
INDICATIONS AND CHARACTERISTICS
- For interior and exterior surfaces.
- Washable paint.
- It can be applied on plaster, cement, distemper, etc.
- Easy application.
- A good coverage and whiteness.
- A good efficiency.

PREPARATION
It is recommended two coats dilute 15% to 20% into water for the first coat of painting (1 litre of water per 5 Kgs. of paint) and between  5%-10% in the second one (a glass of water per 5 Kgs. of paint).

APPLICATION
With a brush, a wool roller or a spray-gun.

SPREADING RATE
Approximately 4,5- 6,0 m2/Kg. applying two coats with a wool roller.

COLOURS
Only white.

FINISHES
An excellent finish so much on smooth as on distemper.

TECHNICAL CHARACTERISTICS
Nature : Copolymer resins.. 
Pigment : Titanium dioxide.
Density : 1,30 gr./cm3.
Thinner : Water.
Drying time (in normal conditions) 
· to touch : 1 hour and 30 minutes.
· recoating interval :  2- 4 hours.
· fully dry : 28 days.
Pot life 
· 7 days at  50º C : All right.
· if the tin is not opened : One year.
Toxicity : It does not contain arsenics, mercury, silver or plumb.
Do not use by temperatures below  5º C.
Gloss (on canvas PVC) : > 70.

NOTE: The data reflected here is informative and agree with the rehearsals carried out in our Laboratories under good conditions of application. If these suffer a change they would be carried out a previous rehearsal again.

Previous Page
Next Page
Satiny Plastics