INDICATIONS AND CHARACTERISTICS
Antirust synthetic primming for protection of iron/steel in general, for exteriors and interiors.
Very good antirust protection.
Excellent adherence.
Very good coverage.
Quick drying.

TECHNICAL CHARACTERISTICS
Gloss : Satiny. 
Colours : Orange.
Solids volume rate : 60%.
Density : 1,8Kg/lt.
Drying time at 20º C and 65% H.R. Without stickiness : 4 - 5 hours. Recoating interval : 6- 8 hours.
Resistance continuous temperature : 90º C (dry heat).
Coverage : 10-14 m2/l. 

APPLICATION
Conditions of application: Temperature between 5 and 40º C. 
Relative humidity : 85%. 
It is recommendable a good stirring of the product before use. 
o apply with :          Brush/roller       Spray-gun           airless-gun 
Thinner  :                   160.0920             160.0920               160.0920 
Dilution :                           0-5%                 10-15%                  5-10% 
Clean tools  : Synthetic and Oil Thinner. 

METHOD OF APPLICATION
Preparation of the surface : Apply only on dry and clean surfaces. 
New iron : Proceed to sandpaper and remove grease to the metal, apply
electrolitical minium of plumb, two or three coats and finish with synthetic enamel SEDALUX with         polyurethane. 
Old iron : Proceed in order to eliminate the rust and old paint loosely attached,
through sandpapered, removered, etc. When it is clean proceed as new iron. 

ADDITIONAL INFORMATION
Pot life : 24 months since production, in original tin, do not open, store in a
dry place with temperatures between 5 and 35º C. 

NOTE: The data reflected here is informative and agree with the rehearsals carried out in our Laboratories under good conditions of application. If these suffer a change they would be carried out a previous rehearsal again.