USES
AND CHARACTERISTICS
Asphaltic paint like waterproof
coating and cheap painted for iron, steel, wood, cement, etc.
Easy application with a
spray-gun, brush or roller.
It has a soft smell.
High spreading rate and
semi-glossy paint.
Resistant in touch with
water, chloride water, neutral salt solutions, hot water up to 60º
C.
No resistant to the petrol,
oils, greases and dissolvents.
PREPARATION
AND APPLICATION
The surfaces must be dried
and cleaned of dust, rust, greases, etc.
It can be applied with a
roller, brush or spray-gun.
SPREADING
RATE
Approximately between 6
and 8 mt2/litre, depending on absorption of the surface.
COLOURS
Black.
TECHNICAL
CHARACTERISTICS
Density at 20º C :
0.95+/-0.05
Viscosity at 20º C
: 25-30 seg.Ford nº 4
Drying time (in normal conditions)
- to touch : 6 hours.
- recoating interval : 24
hours.
Clean tools : Water.
Thinner : synthetic and
caoutchouc chloride.
Pot life : 36 months since
production, in original tin, do not open, store in a dry place with temperatures
between 5º C and 35º C.
NOTE: The data reflected
here is informative and agree with the rehearsals carried out in our Laboratories
under good conditions of application. If these suffer a change they
would be carried out a previous rehearsal again.
