INDICATIONS AND CHARACTERISTICS 
Synthetic glossy enamel based on resins with polyurethane, that improve the characteristics of the traditional enamels. 
Easy application.
High gloss. 
Good coverage. 
Elastic. 
Excellent hardness and resistance. 
High durability. Glossy. 
Colours : Various shades. See our SEDALUX COLOUR CHART. 
Solids volume ratio : 40% (average).
Viscosity : 85-95 U.K.
Density : It depends on the colour. Average:1'25 Kg/l., 1'20 Kg/l. for white.
Drying time at 20º C and 65% H.R.: To touch: 1'5-2 hours. Whitout stickiness 4-6 hours.
Recoating interval: 18 hours. 
Resistance continuous temperature : 90º C (dry heat) 
Spreading rate : Approximately 12-14 m2 per litre and applying one coat. 

APPLICATION 
Conditions of application : Temperature between 5 and 40º C. 
Relative humidity: 85%. 
Application : Brush, roller, spray-gun, airless-gun. 
It is recommendable a good stirring of the product before use. 
Clean tools with synthetic and oil tinners. 

METHOD OF APPLICATION 
Preparation of the surface : Apply only on a dry and clean surface. 
 ** NEW SURFACES ** 
Iron/Steel: Primer with MINIO DE PLOMO (electrolítico) or IMPRIMACION ANTIOXIDANTE FRAYCAR. 
Galvanized steel: Apply the primming and paint for galvanized GALVODUR ACABADO FRAYCAR. 
Wood/Plaster: Primer with SELLADORA UNIVERSAL FRAYCAR. 
"Dead-burnt" dusty plaster: Fix with FIXAMUR and primer with SELLADORA UNIVERSAL  FRAYCAR. 
** PAINTED SURFACES ** 
If paint is in good condition, it will be cleaned and sandpapered. If paint is bad adhered, it must be removed and then follow the same procedure as new surfaces. 
Finish:  Apply two coats of Sedalux. 
Pot life:  48 months, since its production, in original tin, do not open, store in a place with temperatures between 5 and 35º C. 

NOTE: The data reflected here is informative and agree with the rehearsals carried out in our Laboratories under good conditions of application. If these suffer a change they would be carried out a previous rehearsal again.