INDICATIONS
AND CHARACTERISTICS
Synthetic satiny enamel
with a high quality on the basis of resins with polyurethane.
For interior and exterior
surfaces, suitable specially for lacquered of furnitures, doors, windows
and for enameled the kitchens and bathrooms.
Satiny finish, a soft touch.
Good coverage. Easy application.
Quick drying.
High resintance. Washable.
TECHNICAL
CHARACTERISTICS
Gloss : Satiny.
Colours : White and Black.
Solids volume ratio : 42%
average.
Viscosity : 85-95
U.K.
Density : Average: 1 Kg/l.,
1’15 Kg/l.
Drying time at 20º
C and 65% H.R.: Whitout stickiness 4-5 hours. recoating interval:
16 – 24 hours.
Resistance continuous temperature
: 90º C (dry heat)
Spreading rate : Approximately
12-16 m2/l aplying with a brush.
APPLICATION
Conditions of application
: Temperature between 5 and 40º C.
Relative humidity: 85%.
Application : Brush, roller,
spray-gun, airless-gun.
It is recommendable a good
stirring of the product before use.
Clean tools with synthetic
and oil tinners.
METHOD
OF APPLICATION
Preparation of the surface
: Apply only on a dry and clean surface.
** NEW SURFACES **
Iron/Steel: Primer with
MINIO
DE PLOMO (electrolítico) or IMPRIMACION
ANTIOXIDANTE FRAYCAR.
Galvanized steel: Apply
the primming and paint for galvanized GALVODUR
ACABADO FRAYCAR.
Wood/Plaster: Primer with
SELLADORA
UNIVERSAL FRAYCAR.
"Dead-burnt" dusty plaster:
Fix with
FIXAMUR and primer with SELLADORA
UNIVERSAL FRAYCAR diluted with 20% of turpentine.
** PAINTED SURFACES **
If paint is
in good condition, it will be cleaned and sandpapered. If paint is bad
adhered, it must be removed and then follow the same procedure as new surfaces.
Finish: Apply two
coats of Sedalux.
Pot life: 48 months,
since its production, in original tin, do not open, store in a place with
temperatures between 5 and 35º C.
NOTE: The data reflected
here is informative and agree with the rehearsals carried out in our Laboratories
under good conditions of application. If these suffer a change they would
be carried out a previous rehearsal again.
