INDICATIONS AND CHARACTERISTICS
Sealer primming for wood and plaster.
Good penetration and adhesion, sealing surfaces.
Excellent flexibility.
Very good coverage.
Easy sandpapered.
Quick drying.
Most appropriate to prepare, before painting, plaster walls and ceilings as well as wooden surfaces.

TECHNICAL CHARACTERISTICS 
Gloss: Mat.
Colour: White.
Solids volume rate: 61%.
Density: 1,48Kg/lt.
Drying time at 20º C and 65% H.R. Whitout stickiness: 4-5 hours. Recoating interval: 24 hours.
Resistance continuous temperature: 90º C (dry heat)
Coverage: 10-14 m2/l, it depends on absorption and the type of surface.

APPLICATION
Conditions : Apply with temperatures between 5 and 40º C. Relative humidity: 85%.
Tools and application: It is recommendable a good stirring of the product before use.
                               Brush/Roller,          Spray-gun,          Airless-gun
Thinner:                  160.0920               160.0920                 160.0920
Dilution :                         0-5%                   10-15%                    5-10%
Clean tools with Synthetic and Oil Thinner.

HOW TO USE
Preparation of the surface: Apply on dry and clean surfaces.
Wood: For good finishing, it is recommended sandpaper the surface before applying the sealer.
Plaster: On this type of surface, it should be thinned for good sealing.
Observations: If you want to dye it, enamel with colours SEDALUX ALTO BRILLO or Tinte Universal can be used, both up to a maximum of 5%.

ADDITIONAL INFORMATION
Pot life: 24 months, since its production, in original tin, do not open, store in a dry place with temperatures between 5 and 35º C.
Colours: White.

NOTE: The data reflected here is informative and  agree with the rehearsals carried out in our Laboratories under good conditions of application. If these suffer a change they would be carried out a previous rehearsal again.