SISA AL AGUA
 
USES AND CHARACTERISTICS
Special product for laying of gold and silver leaf. 

PREPARATION
Apply over clean. The surface must be very cleaned eliminating free particles of the object to decorate. 
Do not dilute the first coat and leave during two minutes. Immediately put the leafs on product. 

APPLICATION
It can be applied with a brush or roller. 

SPREADING RATE
Approximately between 2 and 3 m2/Kg. per litre. 

COLOURS
The Sisa has a milky aspect, it is transformed in colourless when it is dry. 

TECHNICAL CHARACTERISTICS
Viscosity : 10.560. 
PH : 8,30 
Nature : Copolymer resins. 
Pigment : Titanium dioxide. 
Density : 1,05 gr./cm3. 
Thinner : Water. 
Solids volume rate: 50% 
Drying time (in normal conditions) 
· to touch : 3 hours. 
· recoating interval : Between 2 and 4 hours. 
· fully dry : 28 days. 
· washable : 28 days. 
Pot life 
· 7 days at 50º C: All right. 
· if the tin is not opened : One year. 
Toxicity : It does not contain arsenics, mercury, silver or plumb. 
Do not use by temperatures below : 5º C. 
Whiteness (interval 0...100) : 0 
Coverage (interval 0...100) : 0 
Washable Gardner (interval 0...5000 Psd): Above 5.000 double coats (28 days). 

NOTE: The data reflected here is informative and agree with the rehearsals carried out in our Laboratories under good conditions of application. If these suffer a change they would be carried out a previous rehearsal again.

Previous Page
Next Page
 Fixings