INDICATIONS AND CHARACTERISTICS
- For exterior and interior surfaces.
- Very washable paint.
- It can be applied on cement, plaster, etc.
- Easy application.
- A good coverage and whiteness.
PREPARATION
Apply over clean. 
When the surface has slaked lime, dust, mildew, etc. Acrylic Fixing ACRIFIX  should be applied on interior walls and FIXAMUR with solvent on exterior walls.
It is recommended two coats dilute 15% to 20% into water for the first coat of painting (1 litre of water per 5 Kgs. of paint) in the second one (a glass of water per 5 Kgs. of paint).
APPLICATION
With a brush, a wool roller or a spray-gun.
SPREADING RATE
Approximately  4-5 m2/Kg. applying two coats with a wool roller.
COLOURS
Only white.
FINISHES
To obtain smooth finishes (with a wool roller or brush).
TECHNICAL CHARACTERISTICS
Viscosity :  10.090.
PH : 8,43
Nature :  Copolymer resins.
Pigment :  Titanium dioxide.
Density :  1,58 gr./cm3.
Thinner : Water.
Solids Volume Rate :  65,50
Drying time (in normal conditions) 
· to touch :  1 hours and 30 minutes.
· recoating interval :  2- 4 hours.
· fully dry :  28 days.
· washable :  28 days.
Pot life 
· 7 days at  50º C:  All right.
· If the tin is not opened :  One year.
Toxicity : It does not contain arsenics, mercury, silver or plumb.
Do not use by temperatures below  5º C.
Whiteness (interval 0...100):  97
Coverage (interval 0...100):  96
Washable Gardner (interval 0...5000 Psd):  More than 5.000 double coats (28 days).

NOTE: The data reflected here is informative and  agree with the rehearsals carried out in our Laboratories under good conditions of application. If these suffer a change they would be carried out a previous rehearsal again.