VALCRON LISO
 
INDICATIONS AND CHARACTERISTICS
- High quality. For exterior decoration: yards lighting, front of buildings,  industrial buildings, etc.
- Excellent in interior decoration, when the finish is transpirable.
- It is moistureproof and  waterproof. 
- High hardness and resistance. Easy application. To apply on cement, plaster, white plaster, etc.
- A good coverage and whiteness.
PREPARATION
Apply over clean. When the surface has slaked lime, dust, mildew, etc. FIXAMUR with solvent should be applied on walls.
It is recommended two coats dilute 15% to 20%  into water for the first coat of painting (1 litre of water per 5 Kgs. of paint) and between  5%-10% in the second one (a glass of water per 5 Kgs. of paint).
APPLICATION
With a brush, a wool roller or spray-gun.
SPREADING RATE
Approximately 2,5- 4,5 m2/Kg. with a wool roller.
COLOURS
White and other shades. See  COLOURS CHART. For important orders, any colour can be made providing a sample of colour to PINTURAS FRAYCAR.
FINISHES
To obtain smooth finishes (with a wool roller or brush). If you use the spray-gun the finish "distemper" should be obtained. If you comb the surface you will obtain a different finish. With a polythene roller should be obtained a textured finish very soft and other types of finish as the grooved finish.
TECHNICAL CHARACTERISTICS
Nature : Copolymer resins. 
Pigment : Titanium dioxide.
Density : 1,50 gr./cm3.
Thinner : Water.
Drying time (in normal conditions) 
- to touch : 2 hours.
- recoating interval : 2- 4 hours.
- fully dry : 28 days.
Pot life 
- 7 days at 50º C : All right.
- store in a dry place and do not open : One year.
Toxicity : It does not contain arsenics, mercury, silver or plumb.
Do not use by temperatures below 5º C.

NOTE: This product has passed the resistance test at cycles of ice and thaw, erosion, ageing and acting of the environment, etc. it is in accordance with regulation U.N.E. 48-255-92. It possesses the Certificate of Quality and Bahaviour issued by GEOCISA report Nº 21.002-96-191

NOTE: The data reflected here is informative and agree with the rehearsals carried out in our Laboratories under good conditions   of application. If these suffer a change they would be carried out a previous rehearsal again.

 Previous Page
 Next Page
 Front Revetments