INDICATIONS AND CHARACTERISTICS
- For interior and exterior decoration: High quality.
- It is moistureproof and waterproof.
- High hardness and fastness.
- Easy application.
- To cover the imperfection on surface.
- Very rugous finishes and distemper.

PREPARATION
For best result is recommended two coats, dilute 15% to 20%  into water for the first coat of painting (1 litre of water per 5 Kgs. of paint), or with Smooth Revetment VALCRON and between 5%-10% in the second one. The rugous finish should be more soft when you will increased the water.

APPLICATION
With a wool roller, a brush or a spray-gun. To obtain a "distemper" finish with a high resistance using spray-gun.

SPREADING RATE
Approximately 0,8-1,3 m2/Kg. applying with a roller and it is depend on increasing the water and 0.85 m2/Kg. applying with a spray-gun.

COLOURS
White and other shades of the COLOURS CHART. 
For important orders, any colour can be maked providing a sample of colour at PINTURAS FRAYCAR.

FINISHES
It depends on the quantity of water added. It can be obtained rugous finishes.

TECHNICAL CHARACTERISTICS
Nature : Acrylic copolymer resins.
Pigment : Titanium dioxide.
Density : 1,90 gr./cm3.
Thinner : Water.
Drying time (in normal conditions) 
- to touch : 2 hours.
- fully dry : 28 days.
Pot life 
- 7 days at 50º C : All right.
- If the tin is not opened : One year.
Toxicity : It does not contain arsenics, mercury, silver or plumb.
Do not use by temperatures below 5º C.

NOTE: The data reflected here is informative and  agree with the rehearsals carried out in our Laboratories under good conditions of application. If these suffer a change they would be carried out a previous rehearsal again.